Products Category -

ANCHORAGES

Introduction to Anchors
According to EN 795:2012, Anchor devices have been classified into various types, name Type A, B, C, D and E. A-SAFE offer a range of anchor devices which fail under various such types.

TYPE A EN795:2012

TYPE B EN795:2012

CROSS ARM EN795:2012

GUIDED TYPE ROPE GRAB

TEMPORARY ANCHORAGE LINE SYSTEM

TYPE A (EN795:2012)

This type is an anchor device with one or more stationary anchor points having the need of a structural anchor or fixing element to fix the structure. This type of Anchor is usually small, and may or not vbe removed from the supporting structure due to be fixed, such as with rivets, stud, screws, welds or resin bonding.

AS-SA 09 Aluminum Point Anchor

This point-anchor is compact, made of Aluminium Alloy, highly corrosion resistant and can be bolted on any structure with the help of 2 screw-bolts. The anchorage provided by its eye-bolt has been tested to withstand the impact load in all the 3 axis, and hence provides the highest level of safety.

Structures on which it can be mounted :

On Concrete structures having minimum width of 125mm.
Metal Structures using Metal Bolts..

Technical Description :

Material : Aluminium Alloy.
Minimum Breaking (System) Strength : 5000lbs/23kN.
Net Weight : 308gms.
Conforms to EN 795 : 2012 Type A & ANSI Z 359.1 : 2007.

TYPE B Anchor(EN 795:2012)

AS-SA 11 Parapet Anchor

The A-SAFE Parapet Anchor provides a safe anchorage point on parapets and facades. A regular Screw-bolt anchor cannot be used in such places because it may damage the base structure.
A-SAFE Parapet Anchor preserves the look of the parapet and facade, while providing a safe anchorage point. The soft part on the inner of the Flanges also ensures that the parapet is not damaged.
The adjustable Flanges make the A-SAFEParapet Anchor device versatile for use on various structures having a width ranging from 60mm to 360mm.

Material: High strength steel galvanized to provide corrosion protection.
Minimum Breaking (System) Strength : 5000lbs/23kN.
Flange width adjustable from 60mm to 360mm.
Net Weight : 9000gms ±100gms.
Conforms to EN 795 : 2012 Type B & ANSI Z 359.1:2007.

AS-SA 11(B) Parapet Anchor with Extended Movable Arm

The A-SAFE Parapet Anchor provides a safe anchorage point on parapets and facades.It consists of extended movable arm which allows installation on the parapet with mounting on outer edge.

Material: High strength steel galvanised to provide corrosion protection.
Minimum Breaking (System) Strength : 5000lbs/23kN.
Flange width adjustable from 60mm to 360mm.
Net Weight : 9560gms +_100gms
Conforms to EN 795 : 2012 Type B & ANSI Z 359.1 : 2007

AS-SA 15 Beam Anchor Trolley

A-SAFE Beam-Anchor Trolley, provides a movable anchorage point using the length of the Beam to which it is mounted, to move along with the user.

This Trolley allows continous safe anchorage by allowing the anchor point to travel acress the length of the beam, along with the user.
It is constructed of Aluminium and Stainless steel, is highly corrosion resistant, and is extremely easy to install.

The Flanges are adjustable, and can be adjusted to widths from 80mm to 250mm.

The wheels of the trolley are made of special electrically insulated rollers, hence provide safe working in places having electrical hazards. Minimum dielectric resistance is 30kv.

Anchorage is provided by a forged Aluminium D-ring stitched to a webbing of length 170mm ±5mm attached to the trolley-bar.

Minimum Breaking (System) Strength : 5000lbs/23kN.
Net Weight : 3700gms ± 10gms.
Conforms to EN 795 : 2012 Type B & ANSI Z 359.1:2007.

AS-SA 15(A) Beam Anchor Trolley

This Beam-Anchor Trolley, also provides a movable anchorage point using the length of the overhead Beam to which it is mounted, to move along with the user.
Anchorage is provided by a Steel D-ring attached to the trolley-bar.
It is constructed of Aluminum and Stainless steel, is highly corrosion resistant, and extremely easy to install.
The Flanges are adjustable, and can be adjusted to widths from 80mm to 250mm.
The wheels of the trolley provide extremely smooth movement over the beam, over which it is mounted.

Minimum Breaking (System) Strength : 5000lbs/23kN.
Net Weight : 3900gms ± 10gms.
Conforms to EN 795 : 2012 Type B & ANSI Z 359.1:2007.

Door & Window Anchorage

Door / Window Anchor a perfect non-penetrating anchor solution

AS 802 (Certified for 2 users)

A-SAFE Door Anchor provides a non–intrusive anchor point and can be easily installed inside the interior of a building or window opening enabling the most difficult jobs to get done safely and with confidence.
A-SAFE Door Anchor can be installed by just compressing it against the door or window frame, jamming itself between the two vertical sides.
It is constructed of Aluminum alloy, hence is highly corrosion resistant and is light in weight, weighing less than 4.85 kg.
The Arms of the KARAM Door Anchor are adjustable, enabling installation on door/window frames of width from 60 cm to 125 cm.
Fast and easy Installation with built in adjustment knob hence no tools or drilling is required.
Extremely portable design for easy transport, storage and usage.

Minimum Breaking Strength : 15kN
Every Door Anchor is provided with Door Anchor Bag Ref. BG 34
Conforms to EN 795: 2012 Type B & TS 16415 : 2013 Type B

Cross Arm Strap TYPE B Anchor(EN 795:2012)

A-SAFE provides a wide range of Cross Arn Straps of various configurations and lengths that can be as per requirement.

AS 804 Cross Arm Strap

Made up of 44mm wide polyester.
Length 1.0, 1.5, 2.0 mtr or as requested.
Has a D-Ring on both ends
Strength: Min 18 kN for 3 minutes.
Conforms to EN 795 : 2012 Type B.

PN 815(04) Telescopic Pole

Material: Fiberglass.

Maximum Length: 4.95 m.

Minimum Length: 1.95 m.

Weight: 3800 gms.

PN815(03) Hanging Hook

Material: Alloy Steel, Plustic Moulded

Weight: 190 gms

PN 815(01) Head

Lenght: 240 mm.
Weight: 185 gms.

PN 815(02) Extension Section.

Length: 1 m.
Weight: 425 gms.

PN 815(01)

Length: 240 mm.

Weight: 185 gms.

PN 154 Aluminum Anchorage Hook

Material: Aluminum Alloy
Opening: 65 mm.

Minimum Breaking Stregth: 23 kN.

Weight: 480 gms.

Finish: Natural Silver / Coloured Anodized.

Conforms: EN 362:2004 Class A & EN 795:2015 Type B.

GUIDED TYPE ROPE GRAB

A-SAFE ADVANTAGE

A-SAFE Rope grab is provided with a unique Gravity Locking System that prevent incorrect usage. It is also eqipped with a double secutrity opening system and hence will not open unless a deliberate action is done to do so